Harken 150KIT Cam cleat rebuild kit Manual do Utilizador descarregar pdf

150 Cam-Matic

Rebuild Kit

150KIT

Printed in USA 4685/03-13

Harken equipment requires minimal maintenance, but some is required to give

the best service and to comply with Harken's limited warranty.

It is important to keep equipment clean by frequent flushing with fresh water.

In corrosive atmospheres, stainless parts may show discoloration around holes,

rivets and screws. This is not serious and may be removed with a fine abrasive.

Important: Exposure to some teak cleaners and other caustic solutions can

result in discoloration of part and is not covered under the Harken warranty.

For additional safety, maintenance and warranty information see

www.harken.com/manuals or the Harken

catalog.

Maintenance

Warranty

Cam-Matic

Cam Cleat Not Included

375

Replacement

Parts in Kit:

Qty Description Qty Description

Cam Cap

Torsion Spring

Delrin

Balls

Cam Base

Washer

145 296

295

137

298

425

Yellow, Blue, Red, Green, Black

Accessories You Can Purchase

for the 150 Cam-Matic

You can watch a video demonstration of rebuilding a cam at:

http://www.harken.com/Cam-Matic_Rebuild_Video/

Click on "Rebuild your 150 Cam Cleat” to play.

Video Demonstration

This baseplate

does not ﬁt cams

built before 1993.

Delrin

is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates

Additional information:

www.harken.com\manuals

1 2 3 4

Resumo do Conteúdo

Página 1 - Rebuild Kit

150 Cam-Matic® Rebuild Kit150KITPrinted in USA 4685/03-13Harken equipment requires minimal maintenance, but some is required to give the best serv

Página 2 - Rebuild Kit

• Remove cam from deck. • Take off red plastic baseplate. Carefully work one end up and then other.• Remove torsion springs.• Carefully put small bolt

Página 3

• Remove cam from deck. • Take off red plastic baseplate. Carefully work one end up and then other.• Remove torsion springs.• Carefully put small bolt

Página 4

150 Cam-Matic® Rebuild Kit150KITPrinted in USA 4685/03-13Harken equipment requires minimal maintenance, but some is required to give the best serv