Harken 7000 Carbo Racing Foil Manual do Utilizador descarregar pdf

CARBO

RACING FOIL

Unit 0, 1, 2, 3

Installation Manual – Intended for specialized personnel or expert users

4364 09/14

Please read these instructions carefully before installing, servicing, or

operating the equipment.This manual may be modified without notice.

See: www.harken.com/manuals for updated versions.

PLEASE SAVE THESE INSTRUCTIONS

Preassembly

Specifications, parts, tools, feeder height,

measuring and cutting foil, drilling trim cap hole. 2-3

Installation

Upper spacer tube, foil and trim cap,

feeder, bottom spacer tube and prefeeder,

halyard lead, chafe guard. 4-6

Operation

Using foil, raising sail, quieting bare foil, misfeads. 6

Troubleshooting

For installation and use. 7

Maintenance, storing, warranty 8

WARNING!: Strictly follow all instructions

to avoid an accident, damage to your vessel,

personal injury or death. See www.harken.com

for additional safety information.

1 2 3 4 5 6 7 8

Resumo do Conteúdo

Página 1 - RACING FOIL

CARBO® RACING FOILUnit 0, 1, 2, 3Installation Manual – Intended for specialized personnel or expert users4364 09/14Please read these instructions care

Página 2 - Pre-Assembly

2 Unit 0, 1, 2, 3 Carbo Racing Foil Required Phillips head screwdriver Flat-bladed screwdriver Hacksaw Pliers Tape measure Drill with 5 mm (

Página 3

Unit 0, 1, 2, 3 Carbo Racing Foil 3Pre-Assembly1. Lay Out Foil Unroll foil and let it relax for a day or so before installing. 2. Feeder Height

Página 4 - Installation

Splay 5" (127 mm) upper spacer tube with flat bladed screwdriver, slip onto stay and tape.1. Upper Spacer Tube Important: Tape full length of spa

Página 5

Installation Unit 0, 1, 2, 3 Carbo Racing Foil 55. FeederSlip feeder into place and firmly push upwards. Coat screw with blue Loctite® and tighten

Página 6 - Using Carbo Racing Foil

6 Unit 0, 1, 2, 3 Carbo Racing Foil InstallationHalyard Lead Halyard must be parallel to stay. If halyard pulls at an aft angle, it will pull out lu

Página 7 - Troubleshooting

Unit 0, 1, 2, 3 Carbo Racing Foil 7UseProblem Probable Cause SolutionBare foil is noisy in wind. Needs to be stabilized.Wrap jib halyard around f

Página 8 - 97653 14879

N15W24983 Bluemound Rd., Pewaukee, WI 53072 Telephone: (262) 691-3320 • Fax: (262) 701-5780 Web: www.harken.com • Email: [email protected] Harken

Modelos relacionados 7001 Carbo Racing Foil | 7002 Carbo Racing Foil | 7003 Carbo Racing Foil |

Mais documentos para Hardware Harken 7000 Carbo Racing Foil

Para ver o documento Harken 7000 Carbo Racing Foil Manual do Utilizador

Harken 7000 Carbo Racing Foil Manual do Utilizador (8 páginas)

Comentários a estes Manuais

Sem comentários

Harken 7000 Carbo Racing Foil Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Harken 7000 Carbo Racing Foil. Harken 7000 Carbo Racing Foil User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados 7001 Carbo Racing Foil | 7002 Carbo Racing Foil | 7003 Carbo Racing Foil |

Mais documentos para Hardware Harken 7000 Carbo Racing Foil

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Harken 7000 Carbo Racing Foil