Harken 80.2ST Winche Manual do Utilizador

Radial Winch 80.2 STInstallation and Maintenance ManualMRW-04

10Radial Winch 80.2 STInstallation and Maintenance ManualD. Fill the mounting holes with a suitable marine sealant. E. Remove the excess adhesive/seal

11Radial Winch 80.2 STInstallation and Maintenance ManualOnce the winch is completely disassembled, clean the parts: use a basin of diesel oil to soak

12Radial Winch 80.2 STInstallation and Maintenance ManualExplodedviewwithmaintenanceproducts1.ApplyHarken®greaseonassysocketscrew2.ApplyH

13Radial Winch 80.2 STInstallation and Maintenance ManualAssemblyMake sure that the holes and drainage channels in the base of the winch are not obstr

14Radial Winch 80.2 STInstallation and Maintenance ManualHarken®limitedworldwidewarrantyRefer to the Harken® Limited Worldwide Warranty in the Har

15Radial Winch 80.2 STInstallation and Maintenance ManualExploded viewExplodedview3839361537161722242621182520192729301710134313285392633233461242855

16Radial Winch 80.2 STInstallation and Maintenance Manual383936153716172224262118252019272930171013431328539263323346124285561161435A

17Radial Winch 80.2 STInstallation and Maintenance Manual*Servicekitavailable;seewinchkitsectiononthewebsitewww.harken.com**Winchproductst

18Radial Winch 80.2 STInstallation and Maintenance ManualRadialWinch80.2STCC=drum in chromed bronze*Servicekitavailable;seewinchkitsectionon

2Radial Winch 80.2 STInstallation and Maintenance ManualIndexIntroduction 3Technicalcharacteristics 3Weights 3Maximumworkingload 3Outline 3Ins

3Radial Winch 80.2 STInstallation and Maintenance ManualIntroduction - Technical characteristics - OutlineIntroductionThis manual gives technical info

4Radial Winch 80.2 STInstallation and Maintenance ManualInstallationThe winch must be installed on a at area of the deck, reinforced if necessary to

5Radial Winch 80.2 STInstallation and Maintenance Manual1. Unscrew the central screw ( 2Nm/18 in-lb)2. Slide off the assy socket n°393. Slide off the

6Radial Winch 80.2 STInstallation and Maintenance Manual5. Lift off the drum n°157. Lift off the assy housing n°189. Slide out the inner spacer n°34 a

7Radial Winch 80.2 STInstallation and Maintenance Manual11. Disassemble the Assy pinion n°33 and the hub n°3213. Remove washers n°30 and n°29Important

8Radial Winch 80.2 STInstallation and Maintenance Manual17. Slide out the gear n°1019. Remove the shaft n°721. Remove the gear n°1418. Slide out rolle

9Radial Winch 80.2 STInstallation and Maintenance ManualThedrillingcutouttemplateisavailableontheHarken®website,www.harken.comB. Remove the